50
Tri-Light/Lane Light with IP Camera (Standard) and Label
Left-Hand Unit: 7357 R6LN Plus
To route the LAN Cable, follow these steps:
1. From the Tri-Light/Lane Light Pole, route the cable down the rear of the Core
Cabinet. Use a cable tie to secure the cable to the vent.
Note:
Apply enough cable slack to prevent the cable from being stretched during
installation or removal procedures.
2. Continue to route the cable through the left side cable exit hole and into the Bagwell.
3. Pass the cable through the bottom cable exit hole of the Bagwell.
4. Connect the cable to the PoE Switch.
