Tri-Light/Lane Light with IP Camera (Standard) and Label
19
Installing the Tri-Light/Lane Light with IP Camera Assembly
To install the new Tri-Light/Lane Light with IP Camera Assembly, follow these steps:
Note:
Ensure that the NCR Customer Helpdesk is informed when the Tri-Light/Lane
Light with IP Camera is installed in the store.
1. Remove the existing Tri-Light/Lane Light Assembly, if necessary. For more
information, refer to
Removing the Tri-Light/Lane Light (R6)
2. Route the LAN Cable into the Tri-Light/Lane Light Pole.
3. Connect the Tri-Light/Lane Light Cable to the cable extender.
4. Orient the Tri-Light/Lane Light Assembly so that the Lane Light faces the front of
the unit.
