46
Tri-Light/Lane Light with IP Camera (Standard) and Label
Routing the Cables: 7357 R6LN Plus
To route the Tri-Light/Lane Light Cable and the LAN Cable in the 7357 unit, follow
these steps:
1. Route the Tri-Light/Lane Light Cable by doing the following:
a. From the Tri-Light/Lane Light Pole, route the cable down to the cable access hole
on the back of the unit, as shown in the image below. Use a cable tie to secure
the cable to the vent.
Note:
Apply enough cable slack to prevent the cable from being stretched
during installation or removal procedures.
