58
Tri-Light/Lane Light with IP Camera (Standard) and Label
Configuring the Camera Settings
To configure the camera settings, follow these steps:
1. Connect the STP Ethernet Cable from the Tri-Light IP Camera Port to a POE Switch.
2. Connect another LAN Cable from the host to same POE Switch.
3. Access the camera view by doing the following:
a. If viewing the IP Camera for the first time, set the security of the Internet
Explorer browser first and then install the Activex file, as shown in the image
below.
b. Enter the IP Address of the network camera in the address bar and press
Enter
to
access the login interface. The default IP address is 192.168.1.168.
Note:
The host PC must have the same network ID with the camera device.
