Citadel 2.0 - Instruction Manual - page:
85
IM
-
C
2.0
-
12
/2
5
/3
0/
4
0/
DO
/F
X
| V
: 1
0 / 1
1 / 2
0
21
The male moving secondary contact blocks contain twenty-six (26) pins which engage
with female counterparts on the stationary (cell) side.
Factory wiring uses 14 gauge SIS wire.
The circuits are conservatively rated at a maximum of 250 V AC/DC and 10 amps.
See Control Wiring diagrams for the pin out functions associated with each wiring point.
Contact the factory to optionally obtain extended voltage and current ranges on control
circuit.
Male - breaker side (movable)
Wiring terminal screws
Female - switchgear/cubicle (stationary)
Technical Specifications Secondary Control Contact Block Assembly;
Number of Contacts
26 + Gnd
Rated Current
10 Amps
Rated Voltage
250 V AC/DC
Insulation
≥ 10
10
ohms
Material
Polycarbonate
Temp. Range
- 40 to + 125 degree C
Mating cycles
> 500
Terminals
Screw type, copper alloy, hard silver plated
Torque; 0.8N.m
Contact Resistance
≤ 5 micro-ohms
Wire size
10 to 16 gauge; stripping length 10 mm
FIGURE 81
TABLE 13
S W I T C H G E A R C U B I C L E & D R A W - O U T F E A T U R E S
