Citadel 2.0 - Instruction Manual - page:
106
IM
-
C
2.0
-
12
/2
5
/3
0/
4
0/
DO
/F
X
| V
: 1
0 / 1
1 / 2
0
21
Citadel circuit breakers are mechanical devices.
They MUST be maintained properly.
Failure to properly maintain circuit breakers and switchgear can result in
death, serious injury, property damage and premature product failure.
Improperly maintained equipment can prevent its successful functioning
and the successful functioning of connected equipment.
The instructions contained herein should be carefully reviewed,
understood and followed.
The maintenance tasks in Table 14 - page: 113 must be performed regularly.
WARNING
VERY Important Note
CLEANLINESS is a major requirement for the longevity and proper
operation of most medium voltage equipment – the Citadel is no
exception.
Beyond any time frames noted in this instruction manual – it is not
practical for the manufacturing supplier to be aware of the environmental
conditions of each User’s location.
It is the CUSTOMER’S sole responsibility to make practical,
conservative estimates of the time frames needed to clean the Citadel
and associated switchgear such that no fowling or degradation of
insulation, or excessive wear of parts ensues.
WARNING
PERSONS not fully trained and practiced at the tasks before them
Should Not
attempt to operate, or make any attempts at maintenance.
Employ factory trained persons only for all operating and maintenance
functions and / or training of site personnel to perform certain portions
of these tasks.
WARNING
This section covers Inspection, Preventive Maintenance,
Maintenance and Good Operating Practices
The following is NOT in any way to be considered exhaustive.
M A I N T E N A N C E
