Citadel 2.0 - Instruction Manual - page:
108
IM
-
C
2.0
-
12
/2
5
/3
0/
4
0/
DO
/F
X
| V
: 1
0 / 1
1 / 2
0
21
The following list of hand tools describes those normally used in disassembly and
reassembly procedures:
•
Open-end wrenches: 7, 8, 10, 13, 17, 19 and 24 mm
•
Two open-end wrenches: 55 mm are used to exchange shock absorber
•
Sockets: 7, 8, 10, 13 and 17 mm
•
Socket: 36 mm (used for replacing post insulators)
•
Deep sockets: 19 and 24 mm
•
Hex keys: 5, 6, 8 and 10 mm
•
Torque wrench: 0-150 Nm (0-100 ft-lbs)
•
Screwdrivers: 0.032 x 1/4 in wide and 0.055 x 7/16 in wide
•
Pliers
•
Light hammer
•
Dental mirror
•
Flashlight
•
Drift pins: 1/8, 3/16 and 1/4 in
•
Retaining ring plier (external type, tip diameter 0.038 in).
*
The above list is subject to change without notice. Check the NBS website or
call the factory for the most current information
Recommended hand tools Metric hardware is
used on these circuit breakers.
M A I N T E N A N C E
