Navman VHF 7200 Operation Manual Download

Page: 8 / 60

VHF 7200 US and 7200 EU Operation Manual

NAVMAN

1.5 LCD Symbols and Meanings

This simulation shows the locations of all the following information symbols:

Symbol Meaning

TX Transmitting.

HI LO

Transmission power. High (HI) 25W or Low (LO) 1W.

WX Weather

channel.

WX ALT

Weather Alert. Alarm beeps will sound.

7200 US only.

CH1 CH2 CH3 Shows which of the 3 favorite channels, if any, are selected.

Otherwise blank.

Duplex operation. Otherwise, blank for Simplex operation.

ATIS

Enabled for use in European inland waterways. Otherwise blank.

7200 EU only.

Indicates an incoming DSC call, or blinks to notify you of any
unread Call Log messages.

Low Battery warning (activates at 10.5V)

88 Channel

selected

Channel is temporarily deleted from the ALL SCAN operation.

BUSY

Receiver busy with an incoming signal.

USA INT CAN Selected channel bank for VHF radio operations and regulations.

PRI

Priority channel is selected.

Summary of Contents for VHF 7200





























































Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands

Navman VHF 7200, Operation Manual

Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands