Navman VHF 7200 Operation Manual Download

Page: 34 / 60

VHF 7200 US and 7200 EU Operation Manual

NAVMAN

5.2.4 Recall the Most Recent Incoming Call (LAST)

This facility is useful and used frequently.

1. Press CALL/MENU to enter DSC mode. LAST CALL is automatically selected. Press ENT to

display the contact details of the most recent incoming call.

2. Select the working channel and press ENT. (Note: Duplex channels cannot usually be called

and are automatically eliminated from the suggested call list. If the call is to a Coast Station,
the radio will recognize this and select the correct channel.)

3. The radio summarizes the call details and asks for confi rmation to send the call (SEND?).

Press ENT to send the call, and continue as explained in Section 5.2.1.

5.2.5 Call a Group (GROUP)

1. Press CALL MENU to enter DSC mode, then select GROUP. The radio displays the names

of your groups.

2. Select the group that you want to call (the Group MMSID must be set before making the call).

Then set the channel and continue as explained in Section 5.2.1.

5.2.6 Call All Ships (ALL SHIPS)

The ALL SHIPS ROUTINE call option is shown only on the 7200 US.

1. Press CALL MENU to enter DSC mode, then select ALL SHIPS.

2. The priority is set automatically to URGENCY. However, you can select one of the following

call priorities:

URGENCY

for use when a serious situation or problem arises that could lead to a
distress situation

SAFETY

to send safety information to all other vessels in range;

ROUTINE

routine call (

7200 US only

VHF7200 USA

INDIVIDUAL

ROUTINE

>SEND?

VHF7200 USA

INDIVIDUAL

ROUTINE

10:22AM LOC

DSC CALL

INDIVIDUAL

>LAST CALL

GROUP

VHF7200 USA

INDIVIDUAL

ROUTINE

>SET CHANNEL

RD GROUP

055554444

ROUTINE

>SET CHANNEL

SELECT GROUP

>RD GROUP

GROUP #2

GROUP#3

DSC CALL

INDIVIDUAL

LAST CALL

>GROUP

VHF7200 USA

INDIVIDUAL

ROUTINE

>SEND?

ALL SHIPS

URGENCY

>YES

ALL SHIPS

>URGENCY

SAFETY

ROUTINE

DSC CALL

LAST CALL

GROUP

>ALL SHIPS

Summary of Contents for VHF 7200





























































Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands

Navman VHF 7200, Operation Manual

Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands