Navman VHF 7200 Operation Manual Download

Page: 26 / 60

VHF 7200 US and 7200 EU Operation Manual

NAVMAN

Chapter 4 - DSC Setup Menu (DSC SETUP)

A valid user MMSID must be entered to access the DSC functions.

4.1 DSC Setup - Menu Options

The following options are available:

Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change
data.

4.2 Enter Your USER MMSID (USER MMSID)

This is a

once-only

operation. You must enter your user MMSID before you can access the

DSC functions.

You can display and read your user MMSID at any time, but you get only one opportunity to enter
your user MMSID.

Enter your user MMSID.

See section 4.2.

(If you do not have a user

MMSID, see Appendix D.)

USER MMSID

GROUP SETUP

INDIV REPLY

ATIS MMSID

ATIS FUNC

DSC FUNC

LL REPLY

LL RING

Enter or change the name and/or details of a group.

See section 4.3.

Enter or change your ATIS MMSID (

7200 EU only

See section 4.5.

Enable/disable the ATIS function (

7200 EU only

See section 4.5.

Select the type of response to an LL polling request.

See section 4.7.

Turn the DSC operation ON/OFF (on/off).

See section 4.6.

Choose an automatic or manual response to calls (

7200 US only

See

section 4.4.

DSC SETUP

>USER MMSID

GROUP SETUP

INDIV REPLY

USER MMSID

INPUT AGAIN

–––––––––

INPUT USER
MMSID

–––––––––

187654321

MMSID

>STORE

CANCEL

Turn the LL response notifi cation ringtone ON/OFF (on/off).

See

section 4.8.

Summary of Contents for VHF 7200





























































Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands

Navman VHF 7200, Operation Manual

Search results

Summary of Contents for VHF 7200

Reviews:

Related manuals for VHF 7200

Brands by name

Popular brands