M-Nav 760 | User Manual
47
The location is set as the destination and marked with a
chequered fl ag, and the route is calculated immediately and
shown on the map.
To add via points, see the following section.
To see information about the planned route, see section 10.
9.2
Add a Location as a Via Point
Note:
This section assumes that the M-Nav 760 is showing your current route on the map.
When the M-Nav 760 has calculated a route, you can add
one or more locations as via points to visit along the route or
to detour to.
To add a location as a via point, touch
Menu
to display the
‘Navigation main menu’.
Touch
Find location
.
Find and display the location of the fi rst via point (see
sections 8.1 to 8.4 if necessary) that you need to visit.
Note:
The blue line shows the existing route.
Touch
Add a via point
.
The location is immediately added as a via point and the
route is amended to include this new location.
Repeat this procedure to add another via point.
If you need to show or re-order the via points, see section 9.4.