M-Nav 760 | User Manual
17
5 Messages
IMPORTANT:
The M-Nav 760 must be in the docking cradle and connected to the Qube
tracking device in order for you to send and receive messages and otherwise communicate
with your fl eet administrator through the OnlineAVL2 application.
The M-Nav 760 can store a maximum of 500 incoming messages and 250 outgoing messages.
If you exceed the limit for incoming messages, the oldest message will be deleted automatically
when a new message is received.
5.1
Types of Message
The Message option enables you and your fl eet administrator to communicate with each other.
There are three types of message:
•
Information messages.
A unique message from fl eet administrator; e.g. ‘Friday meeting
has been changed to 1000 in Room 9’ or a unique message that you send; e.g. ‘Sorry, can’t
attend, working at customer site all day’.
•
Form messages.
Your fl eet administrator can use a form message to quickly enter and
send information to you in a standard format. Each form message contains preset fi elds; e.g.
Job number. Your fl eet administrator may also set up reply forms for you to use.
•
Route-To messages.
A message from your fl eet administrator with an embedded GPS
location you can use to navigate to an address; e.g. ‘55 Keele Rd, Keele, Newcastle –
customer Anna Thompson, cold water coming out of the hot water tap in the kitchen’. This
message contains the destination address in the fi rst line of the message so that the M-Nav
760 can navigate you to that address automatically. (A form message can also be set up as a
Route-To message.)
5.2 New
Messages
When a new message arrives, the New Message popup box
is displayed on the current screen and a friendly alert sounds.
Touch:
•
Read
to display the new message immediately
•
Cancel
to store the message in your Message List to
read it later, when it is safe or convenient
Examples of the three message types are shown below.