Version 09.02.2023
HW: CAM(V100)(V20)
RL3-A15
P
a
g
e
17
2.10.
Picture settings
The picture settings adjustment can be done by the 3 buttons of the video-interface. Press
the
MENU
button to open the OSD settings menu. To switch to the next menu item, pressing
UP
and
DOWN
will change the selected value. The buttons are embedded in the housing to
avoid accidental changes during or after installation. The picture settings have to be done
separately for AV1 and AV2 while the corresponding input is selected and visible on the
monitor.
Note: The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available:
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
For the rearIR-AV1 (out of function)
IR-AV2 (out of function)
Guide-lines left (out of function)
Guide-lines right (out of function)
Guide lines (out of function)
Note: As the system doesn’t support the vehicle’s CAN, the guide-lines cannot be used.