Version 09.02.2023
HW: CAM(V100)(V20)
RL3-A15
P
a
g
e
5
1.3.
Connection - Video-Interface
The video-interface converts the connected after-market sources video signals into an RGB
digital signal which is inserted in the factory monitor using separate trigger options and it
reads vehicle’s digital signals out of the vehicle’s CAN-bus and converts them for the video
interface.
1.4.
Settings of the 8 Dip switches (black)
Some settings have to be selected by the 8 dip-switches of the
video-interface. Dip position down is ON and position up is OFF.
See the following chapters for detailed information.
Dip
Function
ON (down)
OFF (up)
1
No function
set to OFF
2
Video 1
enabled
disabled
3
Video 2
enabled
disabled
4
No function
set to OFF
5
Rear-view cam type
after-market
factory or none
6
No function
set to OFF
7
No function
set to OFF
8
No function
Set to OFF
