Nautilus Bowflex VeloCore Assembly And Owner'S Manual Download | Manualshive

Page: 5 / 36

background image

Assembly / Owner’s Manual

5

SAFETY WARNING LABELS AND SERIAL NUMBER

FCC Compliance

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

This product complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to CFR47 Part 15 Subpart B of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. In the unlikely event that this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

This product complies with the European Radio Equipment Directive 2014/53/EU.

WARNING!

• Injury or death is possible if caution is not used while using this

machine.

• Keep children and pets away.

• Read and follow all warnings on this machine.

• Refer to the Owner’s Manual for additional warnings and safety

information.

• The heart rate displayed is an approximation and should be used for

reference only.

• Not intended for use by anyone under 14 years of age.

• The maximum user weight for this machine is 325 lbs (147 kg.).

• This machine is for home use only.

• Consult a physician prior to using any exercise equipment.

(Label is available in English and French Canadian only.)

Product specification

Serial number

PARTS

Safety Warning Labels and Serial Number

Lean lock warning/instructions

«
...
3
4
5
6
7
...
»

Summary of Contents for Bowflex VeloCore





































Reviews:

No comments

Related manuals for Bowflex VeloCore

Brand: LifeSpan Pages: 41

Brand: SportsArt Fitness Pages: 68

Brand: Xterra Pages: 24

Brand: Xterra Pages: 24

Brand: NordicTrack Pages: 16

Brand: Nautilus Pages: 44

Brand: ProForm Pages: 16

Brand: ProForm Pages: 16

Brand: Kettler Pages: 12

Brand: Spirit Pages: 11

Brand: Ironman Fitness Pages: 28

Brand: Ironman Fitness Pages: 34

TourTrainer none

Brand: BodyCraft Pages: 1

Brand: BodyCraft Pages: 22

Brand: Orbit Pages: 11

pro-form 250 cx

Brand: ICON Pages: 28

Brand: Movement Pages: 156

Brand: Wattbike Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands