manualshive.com logo in svg

Nautilus Bowflex VeloCore, Assembly And Owner'S Manual, Page: 19 / 36

Share
Download
Nautilus Bowflex VeloCore Assembly And Owner'S Manual Download Page 19

Assembly / Owner’s Manual

19

Emergency Stop

To stop the pedals immediately, push down hard on the Emergency Brake/Resistance Adjustment 

Knob.

This bike cannot stop the Pedals independently of the Flywheel. Reduce the pace to 

slow the Flywheel and Pedals to a stop. Do not dismount the bike until the Pedals have 

come to a complete stop. Be aware that the moving Pedals can strike the backs of the 

legs. 

Resistance Adjustment

Turn the Emergency Brake/Resistance Adjustment Knob to adjust the resistance level. Clockwise will 

increase the value, counter-clockwise will decrease the value. 

Lean Mode

To unlock the leaning mode, push the button all the way down with an open hand. To lock the bike 

in the stationary mode, pull up on the button until it clicks. Take a moment to practice unlocking and 

locking the lean mode.

NOTICE:   

The bike must be upright in order for the Lean Lock Knob to engage in the locked position. 

Do not attempt to set the Knob in a partially locked position.

Console Display

Status LED

Lean mode (unlocked)

Incorrect setting (partially locked)

Console

Stationary mode (locked)

Summary of Contents for Bowflex VeloCore





































Reviews:

No comments