Nautilus Bowflex VeloCore, Assembly And Owner'S Manual

Page: 17 / 36

Assembly / Owner’s Manual
17
Moving and Storing the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities. Make sure that you and
others are all physically fit and able to move the machine safely.
1. Remove the power adapter. Remove the dumbbells, any media devices, or water bottles from the bike before moving it.
2.
Be sure the machine is stabilized in the upright position with the Lean Lock Knob pulled up (locked position).
3. To lock the Flywheel, turn the Emergency Brake/Resistance Adjustment Knob clockwise until it encounters an increase in resistance. Then rotate
the Emergency Brake/Resistance Adjustment Knob another 1/2 turn clockwise.
Tighten the Emergency Brake/Resistance Adjustment Knob as described until the Flywheel is locked before moving it.
4. Use the Transport Handle to carefully lift the machine onto the transport
rollers.
5. Push the machine into position.
6. Carefully lower the machine into position.
NOTICE: Be careful when you move the machine. Abrupt motions can affect
the computer operation.
For safe storage of the machine, remove the power adapter and
place in a secure location. Be sure the machine is stabilized in
the upright position with the Lean Lock Knob pulled up (locked
position). Tighten the Brake/Resistance Adjustment Knob as
described until the Flywheel is locked. Place the machine in a
secure location away from children and pets.
Leveling the Machine
The machine needs to be leveled if your workout area is uneven. Levelers are found on each side of the stabilizers. Lift the stabilizer slightly to take
the weight off the adjuster, then turn the stabilizer foot to adjust.
Do not adjust the levelers to such a height that they detach
or unscrew from the machine. Injury to you or damage to
the machine can occur.
Make sure the machine is level and stable before you exercise.
Before You Start