![background image](http://html.mh-extra.com/html/nautilus/be-strong-commercial-series-u916/be-strong-commercial-series-u916_manual_711575016.webp)
Step 3:
Removing pulley and external snap ring.
Remove pulley 000-6214
from intermediate shaft with
puller or pry bar.
Step 4:
Removing intermediate shaft.
Beware of sharp edges on intermediate shaft.
Remove external snap ring from
intermediate shaft located behind 000-
6214 pulley.
Using a rubber mallet and punch
drive the shaft from the bearing
housing in the frame.
16
Summary of Contents for Be Strong Commercial Series U916
Page 1: ...Be Strong 003 3376 060309A Rework Manual Commercial Series Bike U916 ...
Page 25: ...Place mast in carton Remove seat from bike Get 000 4897 bag and place over seat assembly 25 ...
Page 31: ...Band box shut on both ends Place bands where the upright supports are in box 31 ...
Page 33: ...The Multi Build FISP Load screen should look something like this OR 33 ...