Vector-LP Radio Beacon Transmitter Technical Instruction Manual
Page
3-25
Section 3 Operating Instructions
Issue 1.1
Meter Settings
Change Meter Groups
Select Analog Meter
Calib. Analog Meter
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
Meter Settings
Change Meter Groups
Select Analog Meter
Calib. Analog Meter
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
Meter Settings
Change Meter Groups
Select Analog Meter
Calib. Analog Meter
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
Meter Settings
Change Meter Groups
Select Analog Meter
Calib. Analog Meter
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
Select Analog Meter
Scale 0-400 P
PDM B: 0.00%
(
x
)
PDM A: 0.00%
( )
DC Curr B: 0.00A
( )
DC Curr B: 0.00A
( )
Choose Scale
Select
Back
12:43:16 Power: 0W Side A Bypass
Select Analog Meter
Scale 0-400 P
PDM B: 0.00%
(
x
)
PDM A: 0.00%
( )
DC Curr B: 0.00A
( )
DC Curr B: 0.00A
( )
Choose Scale
Select
Back
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
Selected Parameter
3.6.8.2 Selecting Analog Meter
Select the parameter to be displayed on the
front panel analog meter as follows:
(a) Use
f
or
g
to select the desired meter
parameter and press
Select
. Press
Choose Scale
to select from various
scale options to view the parameter on
the front panel analog meter. Note that
scales with a
P
suffix are power (square
law) scales whereas scales with an
L
suffix are linear scales.
(b) Press
Back
to return to the Meter
Settings screen. A message appears to
confirm saving changes to the EEPROM.
Press
Yes
or
No
.
3.6.8.3 Calibrating Analog Meter
Calibrate the analog meter as follows:
(a) When the analog meter is calibrated,
press
Done
.
3.6.9 Selecting Power Source
Select the transmitter’s power source and
view power source related parameters as
follows:
(a) From the main menu, highlight
Settings
(using
f
and
g
) and press
Select
.
Highlight
Power Source Select
and
press
Select
.
(b) The parameters than can be modified
(press
Modify
and use
f
or
g
) are:
Select
Meters
12:43:16 Power: 0W Side A Bypass
Main Menu
Changeover Control
Events Log
Settings
Peripherals
RCMS Settings
Vector NDB
rev 1. 0. 4. 1
Jul 27 2007
13:52:45
Nautel
Select
Meters
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
Main Menu
Changeover Control
Events Log
Settings
Peripherals
RCMS Settings
Vector NDB
rev 1. 0. 4. 1
Jul 27 2007
13:52:45
Nautel
Settings
Set Real Time Clock
Monitor Settings
Meter Settings
Power Source Select
Configure Sonalert
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
Settings
Set Real Time Clock
Monitor Settings
Meter Settings
Power Source Select
Configure Sonalert
Main Menu
Select
Back
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
Power Source Select
DC I/F Instld: No
Active Power Source:
AC
DC Disconnect Level: 14
DC Reconnect Level : 21
Requested Power Source: BOTH
Main Menu
Modify
Back
12:43:16 Power: 0W Side A Bypass
Power Source Select
DC I/F Instld: No
Active Power Source:
AC
DC Disconnect Level: 14
DC Reconnect Level : 21
Requested Power Source: BOTH
Main Menu
Modify
Back
12:43:16 Power: 0W Side A Bypass
Press the up/down keys to adjust the
analog meter. The reading on the upper
scale should read 100.
(Midscale calibration constant:224)
Reset
Done
Cancel
12:43:16 Power: 0W Side A Bypass
Press the up/down keys to adjust the
analog meter. The reading on the upper
scale should read 100.
(Midscale calibration constant:224)
Reset
Done
Cancel
12:43:16 Power: 0W Side A Bypass
12:43:16 Power: 0W Side A Bypass
