Vector-LP Radio Beacon Transmitter Technical Instruction Manual
Page
7-1
Section 7 Parts Information
Issue 1.1
Vector-LP Radio Beacon Transmitter
TECHNICAL INSTRUCTION MANUAL
Section 7
PARTS INFORMATION
7.1 INTRODUCTION
This section contains parts lists that provide
descriptive and provisioning information for all
electrical and mechanical parts that have
been assigned a reference designation and
form a part of the subject equipment.
7.2 FAMILY TREE
Figure 7-1 depicts the family tree for the
subject equipment. It is based on the
descending order of the reference
designation hierarchy and identifies all
assemblies that have an assigned Nautel
configuration control number.
7.3 HOW TO LOCATE INFORMATION
FOR A SPECIFIC PART
To locate the information for a specific part,
the assigned reference designation for the
part must be known. In addition, the Nautel
configuration control number (e.g.,
NAPC147B) assigned to the assembly
containing the part or the full reference
designation, including the reference
designation of all higher assemblies, must be
known.
7.3.1 When Nautel Configuration
Control Number Is Known
When the Nautel configuration control
number (e.g., NAPC147B) is known, the
information for a specific part can be located
in the alphanumerically sorted reference
designation lists.
7.3.2 When Ref Des Is Known
When the full reference designation is
known, the information for a part can be
located as follows:
x
Refer to the family tree depicted in Figure
7-1 with the full reference designation.
x
Follow the family tree branches to the
block that represents the lowest level
assembly assigned a Nautel
configuration control number. Then locate
the reference designation table for that
Nautel configuration control number.
x
Locate the part's reference designation in
the specified table.
7.4 REFERENCE DESIGNATION
LISTS
Individual reference designation lists are
provided for:
x
Assemblies assigned an alpha-prefixed
Nautel nomenclature (e.g., NAPC147B)
x
Cable harnesses that are assigned a
numbered Nautel part (e.g., 205-8001)
x
Optional kits that are assigned a
numbered Nautel part (e.g., 205-8045)
The reference designation lists, which are
titled and presented in alphanumeric order,
are divided into columns to aid in locating
specific information.
7.5 COLUMN CONTENT
EXPLANATION
The following paragraphs explain the purpose
and contents of each column in the reference
designation lists.
7.5.1 Ref Des Column
The ‘ref des’ column contains the reference
designation for a specific part. These
designations are assigned in accordance with
the requirements of American National
Standard Specification ANSI Y32.16.
Reference designations are listed
alphanumerically in this column.
