Nautel NV30LT-N, Operation & Maintenance Manual

Page: 98 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.80 VERSION 0.1 2015-03-01
Figure 3.2.64: Hard Limiter sub-menu and editing screens
Figure 3.2.65: AGC Limiter sub-menu and editing screens
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X ) button to discard changes and return to the previ-
ous menu. The default selection is OFF.
Use the up and down arrows to select a limit between 0 and
160%, then press the accept (checkmark) button to save the
change. Press the cancel (
X ) button to discard changes and
return to the previous menu. The default limit is 160%.
Use the up and down arrows to select ON or OFF, then press
the accept (checkmark) button to save the change. Press the
cancel (
X
) button to discard changes and return to the previ-
ous menu. The default selection is OFF.
Use the up and down arrows to select a limit between 0 and
160%, then press the accept (checkmark) button to save the
change. Press the cancel (
X ) button to discard changes and
return to the previous menu. The default limit is 120%.
Use the up and down arrows to select a time constant be-
tween 0 and 1000 ms (1 s), then press the accept (check-
mark) button to save the change. Press the cancel (
X ) button
to discard changes and return to the previous menu. The de-
fault selection is 300 ms.