Nautel NV30LT-N, Operation & Maintenance Manual

Page: 176 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.158 VERSION 0.1 2015-03-01
 In the Input section, use the drop-down menu to select the desired input (alarm, status or
custom input) that will affect the rule. Note that a second input may also be selected in
conjunction with a logic operation if the
Operator section contains the AND, OR or XOR
function.
 In the Logic section, use the drop-down menu to select “ Is True ” or “ Is False ” to indicate the
trigger for the assertion of the rule. Select “ Is True ” when you want the rule to assert when
the associated input is active. Select “ Is False ” when you want the rule to assert when the
associated input is inactive.
 In the Operator section, use the drop-down menu to select a logic operation to combine two
inputs. Select “blank” for no logic operation (i.e., for single input rules). For rules that use two
inputs, select
AND , OR or XOR , noting:
– the AND function requires both inputs to be asserted (according to their selected Logic states) to activate the
rule.
– the OR function requires one or both inputs to be asserted (according to their selected Logic states) to
activate the rule.
– the XOR function requires one - and only one - input to be asserted (according to their selected Logic states)
to activate the rule.
 Press the Apply button to save the rule or the Cancel button to return to the Site Control
page.
The Site Control page will display all rules, with the user-defined characteristics described above.
Additionally, the current State of the rule will be displayed in a check-box on the right-hand side of the
page. A checked box indicates the rule is currently active.
Applying a Site Control Rule to a Remote Input/Output
You can apply a site control rule as a Remote Output by selecting the desired rule from the Channel
list in either the Remote Outputs tab. The Channel list should contain the names of all existing rules.
See Remote I/O Settings - Using the AUI, on page 3.2.145 for more details on configuring remote inputs
and outputs.
Custom remote inputs can be created in the Remote Inputs tab. These inputs can be used within a site
control rule.