Nautel NV30LT-N, Operation & Maintenance Manual

Page: 63 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.45
Describing the Meter Display
The meters displayed in the AUI represent the active meters selected for display. Each meter is a colour-
coded bar with minimum and maximum values (see Figure 3.2.32 ). The current value for a meter is
indicated by an arrow on the colour-coded bar, as well as a numeric value below the meter.
– A parameter value in the green section of a meter bar indicates the parameter is within the range for normal
operation.
– A parameter value in the yellow section (as applicable) of a meter bar indicates the parameter is still within
an operational range, but is approaching design limitations.
– A parameter value in the red section of a meter bar indicates the parameter is outside normal operating
conditions.
Accessing Meter Information
Procedures for accessing and editing information in the
Meters
section of the AUI screen:
– To delete a meter from the
Home
page, press
X
in the
Meters
window (
Figure 3.2.32
).
– To review all the meter options, press the meter list view shortcut button (magnifying glass) at the top of the
meters panel (see
Figure 3.2.32
). This will open the
Meter List View
window.
– On the
Meter List View
screen users can see all relevant meters of a sub-device. Select the sub-device in
question under the
Transmitter Layout
column and the
Relevant Meters
column will be populated.
The desired
Meters
can now be selected.
Figure 3.2.32: Meters List View Window (Exciter A shown)
Information
X
to close/delete
Buttons
(displays full
set of meters
for specific
sub-device)
Scroll Bar