Nautel NV30LT-N, Operation & Maintenance Manual

Page: 144 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.126 VERSION 0.1 2015-03-01
Reboot
The
Reboot
page (see Figure 3.2.107 ) allows users to reboot three items - the AUI, the active exciter
and the standby exciter (if installed).
Figure 3.2.107: Reboot page
 To reboot the AUI, click the
Reboot AUI
button. This will function with remote control enabled or
disabled. After the reboot delay, you must log in to the AUI again.
 To reset the active exciter, click the
Reboot Active Exciter
button, if the button is available
(highlighted). NOTE: If the active exciter is reset, a brief interruption in transmitter operation will
occur.
 To reset the standby exciter (for dual exciters), click the
Reboot Standby Exciter
button, if the
button is available (highlighted).
 Click
X
in the upper, right corner to close this page and return to the Home page.