manualshive.com logo in svg

Nautel NV30LT-N, Operation & Maintenance Manual

Share
Download
Nautel NV30LT-N Operation & Maintenance Manual Download Page 221

NV30LT-N OPERATIONS & MAINTENANCE MANUAL

NON-STANDARD MAINTENANCE

VERSION 0.1  2015-03-01

PAGE 3.4.7

Figure 3.4.4: Normal Preset - Other Settings screen

NOTE

: SCA, RDS and Pilot modulation levels are additive and contribute the audio level. If their 

combined levels exceed the audio loss threshold level, a preset change will not occur. Stations with 
audio content containing extended nulls or silent periods (e.g., classical music) should consider 
reducing the audio loss threshold or increasing the timeout period.

5.

After configuring the modulation loss parameters, click the 

Save

 button. The 

Save Preset

 window 

will appear.

6.

Select the preset within the 

Save Preset

 window and click 

Save

.  This completes configuration of 

the Primary Audio preset.  Return to the home AUI panel.

Summary of Contents for NV30LT-N



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands