Trex™ HD Monitoring Amplifier
User & Service Manual
18
ELECTRICAL SHOCK HAZARD:
Do
NOT
service the system. Refer servicing to qualified
personnel only. Do
NOT
use repaired components without proper testing.
3.3. Electrostatic Discharge (ESD) Precautions:
Electrostatic Discharge (ESD) Precaution:
Be sure to take the appropriate
Electrostatic Discharge (ESD) precautions. Disconnect the cables before
moving, cabling, or performing any set up procedures. Connectors marked with
the ESD protection symbol should not be touched. For detailed handling
procedures, refer to the
Electrostatic Discharge Handling Procedure
3.4. Wireless Option Warnings and Cautions
Like other wireless devices, this feature is limited in operating range. The range will also be
reduced substantially if there is any physical interference between the acquisition computer
and the
Trex HD Monitoring
. In either of these situations, the wireless data will not be
received by the acquisition computer.
The
Trex HD Monitoring
contains FCC ID:
R47F2M03GL
which complies with part 15 of
the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
The
Trex HD Monitoring
contains F2M03GLA which has passed the Bluetooth
Qualification/Certification process as specified within the Bluetooth Specifications and as
required within the PRD 2.0.
QDID: B012541
.
Mobile RF communications equipment may affect the
Trex HD Monitoring
and interfere
with wireless operation. See Section 2.1.3 for guidelines.
3.5. Patient Environment Warnings and Cautions
NOTE:
The patient environment is defined as the area within 1.5 meters of the patient
laterally and within 2.5 meters of the floor in the area occupied by the patient.
The Trex HD Monitoring amplifier is
NOT
intended for use with High Frequency Surgical
Equipment.