Nicolet Cortical Stimulator
3-14
Revised 8/27/13
10.
Set Stim
- At startup, the stimulation current level is set to 0 mA. Press the
Set Stim
button and then select the desired stimulation current level:
0 - 15
mA
(8 mA or less is typical) using the
Selector
knob.
NOTE:
If
Ele
or
Electrode -
are changed, the stimulation current level
will reset to 0 mA.
Begin with the lowest current level and increase in small increments.
11.
Mark Channel
- If you want to mark the channels with ID tags prior to and
after stimulation, press the
Mark
Channel
button.
12.
Check Stim
- Press the
Check
Stim
button to check the integrity of the
stimulator without stimulating the patient.
NOTE:
The maximum output voltage available is ±24V.
NOTE:
No precautions are required to be taken for a DC component in the
output since the output is AC coupled.
Summary of Contents for Nicolet SCU
