manualshive.com logo in svg

Native Instruments Komplete Audio 6, Manual

Share
Download
Native Instruments Komplete Audio 6 Manual Download Page 52

▪

If the driver is not installed, you can install it as described in chapter 

↑

2, Installing KOM-

PLETE AUDIO 6

.

▪

If the device is not recognized, check your USB 2.0 connection as described in chapter

↑

7.3, Troubleshooting (Windows)

.

7.3

Troubleshooting (Windows)

 

If you use a computer running Windows and experience problems, please see this Knowledge
Base article:

http://www.native-instruments.com/en/support/knowledge-base/show/800/ni-audio-interface-
troubleshooting-guide-windows/

7.4

Choosing the Correct USB Cable

 

If your device repeatedly loses USB connection to the computer or behaves otherwise erratical-
ly, make sure you are using a suitable USB 2 cable. To learn how to identify USB 2 cables,
please see this Knowledge Base article:

http://www.native-instruments.com/en/support/knowledge-base/show/2085/choosing-the-cor-
rect-usb-cable-for-your-ni-hardware-device/

7.5

Getting Help

 

Native Instruments provides various sources of support and information.

7.5.1

Readme, Knowledge Base, Technical Support

 

Readme

Always read the “Readme” file found on the installation CD. It contains important information
and all last minute changes that could not be included in this manual.

Troubleshooting

Troubleshooting (Windows)

 

KOMPLETE AUDIO 6 - Manual - 52

Summary of Contents for Komplete Audio 6



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands