6.3.1
Connecting a Condenser Microphone
KOMPLETE AUDIO 6 setup with microphone and headphones.
Make sure to have connected the KOMPLETE AUDIO 6 to your computer as described during
the installation chapter (chapter
2, Installing KOMPLETE AUDIO 6
) of this manual.
Make sure the volume on the KOMPLETE AUDIO 6's main outs (Volume Control knob
"
MAIN VOLUME 1/2
") is turned down before connecting a microphone to the KOM-
PLETE AUDIO 6. Microphones nearby speakers can cause a loud squealing tone from
the speakers due to a phenomenon called the Larsen effect or audio feedback loop and
can seriously damage your hearing and your equipment. The greater the distance be-
tween a microphone and speakers means this effect is less likely to occur.
To use the KOMPLETE AUDIO 6 in a recording setup with a condenser microphone:
1.
Turn the Volume Control knob (
MAIN VOLUME 1/2
) on the top panel of the KOMPLETE
AUDIO 6 to the left-end stop to set the main output volume to minimum.
2.
Plug an XLR cable jack from your condenser microphone into either
INPUT 1
or
INPUT 2
on the front panel of your KOMPLETE AUDIO 6.
Using the KOMPLETE AUDIO 6 (Setup Scenarios)
KOMPLETE AUDIO 6 in a Recording Setup
KOMPLETE AUDIO 6 - Manual - 37
Summary of Contents for Komplete Audio 6
Page 1: ...MANUAL ...
