manualshive.com logo in svg

Native Instruments Komplete Audio 6, Manual

Share
Download
Native Instruments Komplete Audio 6 Manual Download Page 41

For information on how to record in your audio recording software, please refer to your
software's documentation.

6.3.3

Connecting a Guitar / Bass Guitar (with headphones)

 

KOMPLETE AUDIO 6 setup with guitar / bass guitar and headphones.

Make sure to have connected the KOMPLETE AUDIO 6 to your computer as described during
the installation chapter (chapter 

↑

2, Installing KOMPLETE AUDIO 6

) of this manual.

To use the KOMPLETE AUDIO 6 in a recording setup with a guitar / bass guitar:
1.

Turn the Volume Control knob (

MAIN VOLUME 1/2

) on the top panel of the KOMPLETE

AUDIO 6 to the left-end stop to set the volume to minimum.

2.

Plug a 1/4" instrument cable (unbalanced) from your instrument into either 

INPUT 1

 or

INPUT 2

 of the KOMPLETE AUDIO 6.

Using the KOMPLETE AUDIO 6 (Setup Scenarios)

KOMPLETE AUDIO 6 in a Recording Setup

 

KOMPLETE AUDIO 6 - Manual - 41

Summary of Contents for Komplete Audio 6



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands