4.1
Front Panel
The front panel of the KOMPLETE AUDIO 6.
(1)
INPUT 1
and
INPUT 2
(Line and Microphone): These inputs have a combination socket for
use with XLR or 1/4" jack connectors. When connecting an XLR connector, an XLR lock latch-
es. You can easily release the connector by pressing the release tab.
The input
GAIN
knob lowers/raises the amount of signal going into the KOMPLETE AUDIO 6.
The
LINE
/
INST
toggle button selects either
LINE
mode for strong-signaled inputs (like a syn-
thesizer or the output of an electric piano) or
INST
for weak-signaled inputs (such as a guitar
or a bass guitar). XLR connected gear is not affected by this button.
(2)
MONITOR
section: The
ON
switch turns direct monitoring on/off. With direct monitoring ac-
tivated, the unaffected input signal will be heard with zero latency. The
ON
switch also dou-
bles as a monitor selector switch. When held for one second, it cycles through three monitor
modes: monitor signal to outputs
OUT 1/2
; monitor signal to outputs
OUT 3/4
; and monitor
signal to both output pairs
OUT 1/2
and
OUT 3/4
. The LEDs from the
MONITOR
section on the
device's top panel display which monitoring mode is currently active.
The
MONO
switch toggles the monitor output selection between a mono signal and a stereo
signal. Switching to a mono setting aids in monitoring a mono signal, such as a guitar’s mono
input.
The Hardware in Detail
Front Panel
KOMPLETE AUDIO 6 - Manual - 17
Summary of Contents for Komplete Audio 6
Page 1: ...MANUAL ...
