manualshive.com logo in svg

Native Instruments Komplete Audio 6, Manual

Share
Download
Native Instruments Komplete Audio 6 Manual Download Page 23

If you cannot find the Control Panel, the software is most likely not installed. In this
case, please (re-)install the software as described in chapter 

↑

2, Installing KOMPLETE

AUDIO 6

.

On the left-hand side of the Control Panel, you find two tabs: 

Audio Settings

 and 

Diagnostics

:

►

Click on the tabs to open the corresponding page of the Control Panel.

Proceed to chapters 

↑

5.1.1, Audio Settings Page

 and 

↑

5.1.2, Diagnostics Page

 for more infor-

mation on the Control Panel's pages.

5.1.1

Audio Settings Page

 

The Control Panel's Audio Settings page.

In the 

Audio Settings

 page, you can configure the audio latency and sample rate; monitor the

device's status; enable clock syncing to external devices; and activate direct monitoring.
The 

Audio Settings

 page consists of four sections: 

Audio Processing

, 

Device Monitor

, 

Digital

Sync Source

, and 

Direct Monitoring

. See the following subchapters for further information.

Advanced Configuration

Advanced Configuration on Windows (Control Panel)

 

KOMPLETE AUDIO 6 - Manual - 23

Summary of Contents for Komplete Audio 6



























































Reviews:

No comments

Brands by name

Popular brands

Load more brands