CALIBRATION PROCEDURE
SCXI -1141/1142/1143
This document contains the information and instructions needed to
calibrate the SCXI-1141/1142/1143 using Traditional NI-DAQ (Legacy).
Calibrate the SCXI-1141/1142/1143 at a regular interval as defined by the
measurement accuracy requirements of your application. NI recommends
performing a complete calibration at least once every year. Based on your
measurement accuracy needs, you can shorten this interval to 90 days or
six months.
Conventions
The following conventions apply to this document:
»
The
»
symbol leads you through nested menu items and dialog box options
to a final action. The sequence
File»Page Setup»Options
directs you to
pull down the
File
menu, select the
Page Setup
item, and select
Options
from the last dialog box.
This icon denotes a tip, which alerts you to advisory information.
This icon denotes a note, which alerts you to important information.
When this symbol is marked on a product, refer to the
Read Me First: Safety
and Radio-Frequency Interference
for information about precautions to
take.
When symbol is marked on a product, it denotes a warning advising you to
take precautions to avoid electrical shock.
When symbol is marked on a product, it denotes a component that may be
hot. Touching this component may result in bodily injury.
bold
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
™
