National Instruments SCXI-1141, Calibration Procedure

Page: 20 / 20

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the
Terms of Use section on
ni.com/legal
for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location:
Help»Patents in your software, the
patents.txt
file on your CD, or
ni.com/patents
.
© 2000–2007 National Instruments Corporation. All rights reserved. 370156C-01 Mar07
Specifications
Table 9 contains test specifications for the SCXI-1141/1142/1143. If the
module has been calibrated within the last year, the
Test Point (V) value
should fall between the Upper Limit (V) and Lower Limit (V) values.
Table 9. SCXI-1141/1142/1143 Specifications
Test Point (V) Gain Upper Limit (V) Lower Limit (V)
4.7500 1 4.771715 4.728285
0.0000 1 0.020480 –0.020480
–4.7500 1 –4.728285 –4.771715
2.3750 2 2.390948 2.359052
0.0000 2 0.015330 –0.015330
–2.3750 2 –2.359052 –2.390948
0.9500 5 0.962487 0.937513
0.0000 5 0.012240 –0.012240
–0.9500 5 –0.937513 –0.962487
0.4750 10 0.486334 0.463666
0.0000 10 0.011210 –0.011210
–0.4750 10 –0.463666 –0.486334
0.2375 20 0.248258 0.226742
0.0000 20 0.010696 –0.010696
–0.2375 20 –0.226742 –0.248258
0.0750 50 0.085408 0.064592
0.0000 50 0.010388 –0.010388
–0.0750 50 –0.064592 –0.085408
0.0375 100 0.047796 0.027204
0.0000 100 0.010286 –0.010286
–0.0375 100 –0.027204 –0.047796