11 of 44
User Guide
QuickSyn Frequency Synthesizer
1 Download the latest available QuickSyn device driver from the
NI Microwave Components website (ni-microwavecomponents.
com).
2 Connect the QuickSyn
Synthesizer to the PC using a USB cable.
The “Installing Device Driver Software” message will pop up in the
lower-right portion of the screen (see Figure 12).
The QuickSyn
device driver requires manual installation; therefore,
two other messages will appear (see Figure 13 and 14).
3 Select
Close
(see Figure 14).
Step 2-3 Install Device Driver Using Manual Installation
(Windows 7)
Figure 12
Example of “Installing device driver software”
NOTE
A quick-start kit containing all the necessary cables and a power supply to quickly
setup and run the QuickSyn
Synthesizer is available for order as MFSW-ACC06.
Figure 13
Example of driver software installation warning
Figure 14
Example of driver software installation warning