7 of 44
User Guide
QuickSyn Frequency Synthesizer
6 Select
Continue Anyway.
7 Select Finish to complete the USB device driver installation.
6 Connect the QuickSyn Synthesizer to the PC using a USB Cable
and proceed to Step 3.
1 Download the latest available QuickSyn USB device driver
from the NI Microwave Components website.
Device drivers are available online at ni-microwavecomponents.com
2 Connect the QuickSyn Synthesizer to the PC using a USB
Cable.
The “Found New Hardware Wizard” should start automatically.
Figure 5
Example of Completing USB Device Driver Installer
NOTE
A quick-start kit containing all the necessary cables and a power supply to quickly
setup and run the QuickSyn
Synthesizer is available for order as MFSW-ACC06.
Step 2-2 Install Device Driver Using Manual Installation
(Windows XP)
NOTE
A quick-start kit containing all the necessary cables and a power supply to quickly
setup and run the QuickSyn
Synthesizer is available for order as MFSW-ACC06.
