![background image](http://html1.mh-extra.com/html/national-instruments/quicksyn-fsw-0010-quicksyn-fsw-0020/quicksyn-fsw-0010-quicksyn-fsw-0020_user-manual_3451778024.webp)
24 of 44
User Guide
QuickSyn Frequency Synthesizer
Step 5. Review Software Front Panels
1 Use the shortcut icon
that was placed on the computer’s
desktop during installation to launch the QuickSyn Soft Front
Panel software.
The “Locate QuickSyn Device” dialog box will appear (see Figure 33).
2 Enter a name for the QuickSyn module. The default name is
“USBComPort.” The name that is entered here will appear
at the top of the Main Control panel, which will help the user
differentiate between multiple QuickSyn units attached to the
computer.
3 Select the com port (If you’re using a GPIB or Ethernet
connection, enter the GPIB or IP address) to which the QuickSyn
module is connected and choose
OK
.
Figure 33
Example of “Locate QuickSyn Device” dialog box
Step 5-1 Launch QuickSyn Soft Front Panel Software
NOTE
The IP address of the Ethernet adapter accessory can be found by selecting the
Network . . . option and selecting the resulting entry that matches the MAC address
of the adapter.