National Instruments PXIe-8840 Quad-Core User Manual Download

Page: 25 / 38

Operating Environment

Caution

The operating temperature must not be exceeded, even when used in a

chassis with a higher temperature range.

Ambient temperature range

5 °C to 50 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 high temperature
limit.)

Extended temperature option

0 °C to 55 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit and MIL-PRF-28800F Class 2 high
temperature limit.)

Relative humidity range

10% to 90%, noncondensing (Tested in
accordance with IEC-60068-2-56.)

Storage Environment

Ambient temperature range

-40 °C to 65 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit.)

Extended Temperature Option

-40 °C to 71 °C (Tested in accordance with
IEC-60068-2-1 and IEC-60068-2-2. Meets
MIL-PRF-28800F Class 3 limits.)

Relative humidity range

5% to 95%, noncondensing (Tested in
accordance with IEC-60068-2-56.)

Shock and Vibration

Operating shock

30 g peak, half-sine, 11 ms pulse (Tested in
accordance with IEC-60068-2-27. Meets MIL-
PRF-28800F Class 2 limits.)

Random vibration

Operating

5 Hz to 500 Hz, 0.3 g

rms

(with solid-state hard

drive)

Nonoperating

5 Hz to 500 Hz, 2.4 g

rms

(Tested in accordance

with IEC-60068-2-64. Nonoperating test
profile exceeds the requirements of MIL-
PRF-28800F, Class 3.)

NI PXIe-8840 Quad-Core User Manual

Summary of Contents for PXIe-8840 Quad-Core







































Search results

Summary of Contents for PXIe-8840 Quad-Core

Reviews:

Related manuals for PXIe-8840 Quad-Core

Brands by name

Popular brands

National Instruments PXIe-8840 Quad-Core, User Manual

Search results

Summary of Contents for PXIe-8840 Quad-Core

Reviews:

Related manuals for PXIe-8840 Quad-Core

Brands by name

Popular brands