National Instruments PXIe-8840 Quad-Core User Manual Download

Page: 15 / 38

devices. Refer to the

CD/DVD ROM Drive BBS Priorities Submenu

section for more

information.

•

Floppy Drive BBS Priorities

—Use this setting to access the

Floppy Drive BBS

Priorities

submenu to re-order or disable bootable floppy drive devices. Refer to the

Floppy Drive BBS Priorities Submenu

section for more information.

•

Network Device BBS Priorities

—Use this setting to access the

Network Device BBS

Priorities

submenu to re-order or disable bootable network devices. Refer to the

Network

Device BBS Priorities Submenu

section for more information.

Boot Settings Configuration Submenu

Use this submenu to apply alternate configurations to boot settings. Normally, you do not need
to modify these settings, as the factory default settings provide the most compatible and
optimal configuration.
•

Setup Prompt Timeout

—This setting specifies the number of seconds the system waits

for a BIOS Setup menu keypress (the <Delete> key). The default value is

•

Bootup NumLock State

—This setting specifies the power-on state of the keyboard

NumLock setting. The default value is

Hard Drive BBS Priorities Submenu

•

Boot Option #1, Boot Option #2, Boot Option #3

—These settings specify the boot

priority of hard drive devices. The highest priority device is displayed on the main

Boot

Option Priorities

list. Optionally, each device can also be

Disabled

if the device should

never be used as a boot device.

CD/DVD ROM Drive BBS Priorities Submenu

•

Boot Option #1, Boot Option #2, Boot Option #3

—These settings specify the boot

priority of CD/DVD ROM drive devices. The highest priority device is displayed on the
main

Boot Option Priorities

list. Optionally, each device can also be

Disabled

if the

device should never be used as a boot device.

Floppy Drive BBS Priorities Submenu

•

Boot Option #1, Boot Option #2, Boot Option #3

—These settings specify the boot

priority of floppy drive devices. The highest priority device is displayed on the main

Boot

Option Priorities

list. Optionally, each device can also be

Disabled

if the device should

never be used as a boot device.

Network Device BBS Priorities Submenu

•

Boot Option #1, Boot Option #2, Boot Option #3

—These settings specify the boot

priority of network devices. The highest priority device is displayed on the main

Boot

Option Priorities

list. Optionally, each device can also be

Disabled

if the device should

never be used as a boot device.

NI PXIe-8840 Quad-Core User Manual

Summary of Contents for PXIe-8840 Quad-Core







































Search results

Summary of Contents for PXIe-8840 Quad-Core

Reviews:

Related manuals for PXIe-8840 Quad-Core

Brands by name

Popular brands

National Instruments PXIe-8840 Quad-Core, User Manual

Search results

Summary of Contents for PXIe-8840 Quad-Core

Reviews:

Related manuals for PXIe-8840 Quad-Core

Brands by name

Popular brands