![background image](http://html1.mh-extra.com/html/national-instruments/pxie-4147/pxie-4147_getting-started-manual_3605853008.webp)
Table 1. Signal Descriptions (Continued)
Item
Description
Pin 24
CH 3 Guard
Pin 25
CH 3 Output LO
Table 2. LED Access Status Indicator
Status Indicator
Device State
(Off)
Not Powered
Green
Powered
Amber
Device is being accessed
Table 3. LED Voltage Status Indicator
Status Indicator
Output Channel State
(Off)
All device outputs are disconnected from their voltage generation sources
through output disconnect relays.
Green
At least one device output is connected to a voltage generation source.
Red
The device has a fault or is in error due to the voltage generated or
measured by the device. Refer to the driver software for possible sources.
The device will not operate until the error is cleared and/or the device is
reset.
Configuring the PXIe-4147 in MAX
Use Measurement & Automation Explorer (MAX) to configure your NI hardware. MAX
informs other programs about which NI hardware products are in the system and how they are
configured. MAX is automatically installed with NI-DCPower.
1.
Launch MAX.
2.
In the configuration tree, expand
Devices and Interfaces
to see the list of installed NI
hardware.
Installed modules appear under the name of their associated chassis.
3.
Expand your
Chassis
tree item.
8
|
ni.com
|
PXIe-4147 Getting Started Guide