Optional Items
•
PXI Slot Blocker Kit (NI part number 199198-01)
Notice
The PXIe-4147 provides higher maximum current and more precise
current measurement capabilities than earlier PXIe-414
x
modules.
Consequently, PXIe-4147 performance can be compromised by the accessories
associated with those modules. The following accessories are not recommended
for use with the PXIe-4147.
–
DB25F-DB25F, 25-pin D-SUB Low Leakage Cable for SMU
•
1 m (NI part number 782015-01)
•
2 m (NI part number 782015-02)
–
Screw Terminal Connector Kit for PXIe-414x SMUs (NI part number
781974-01)
Visit
for more information about these additional items.
Preparing the Environment
Ensure that the environment you are using the PXIe-4147 in meets the following
specifications:
Temperature and Humidity
Temperature
Operating
0 °C to 55 °C
1
Storage
-40 °C to 71 °C
Humidity
Operating
10% to 90%, noncondensing
2
Storage
5% to 95%, noncondensing
1
Not all chassis can achieve this ambient temperature range. Refer to PXI chassis specifications to
determine the ambient temperature ranges your chassis can achieve.
2
When transitioning a device from a storage or operation environment with relative humidity above
70%, device should be allowed to stabilize in the lower humidity environment for several hours
before use. Refer to the PXIe-4147
Programming and Measurement Accuracy/Resolution
specifications for additional performance derating when operating above 70% relative humidity.
PXIe-4147 Getting Started Guide
|
© National Instruments
|
3