Figure 1. Assembling the Tripod
158972B–0
1
REV XX
158972B–0
1
REV XX
1
2
1. 3/4 in. Screws
2. Stud Leveling Feet
2.
Install three stud leveling feet as shown in the previous figure and use to adjust the
mmWave radio head to the desired mounting height. Jam nuts may be tightened to lock
height adjustment according to the specifications in the following table.
Table 4. Tightening Requirements for mmWave Radio Head Tripods
Item
Max Torque (in. x lb)
Driver Size
3/4 in. and 1/2 in. screws
11.5
7/64 in. hex
Stud leveling foot jam nut
11.5
3/8 in. hex
3.
Install the mmWave radio head using six 1/2 in. screws as shown in the following figure
and tighten them according to the specifications in Table 4.
8
|
ni.com
|
mmWave Transceiver System Getting Started Guide