manualshive.com logo in svg

National Instruments PXIe-3610, Getting Started Manual, Page: 30 / 86

Share
Download
National Instruments PXIe-3610 Getting Started Manual Download Page 30

3.

Connect the adjoining PXIe-7902 and PXIe-3610 modules using four Mini-SAS HD(m)-
to-Mini-SAS HD(m) (8.25 in.) cables.
a)

Connect the PORT 0 connector of the PXIe-7902 front panel to the 0 connector of
the PXIe-3610 front panel.

b)

Connect the PORT 1 connector of the PXIe-7902 front panel to the 1 connector of
the PXIe-3610 front panel.

c)

Connect the PORT 2 connector of the PXIe-7902 front panel to the 2 connector of
the PXIe-3610 front panel.

d)

Connect the PORT 3 connector of the PXIe-7902 front panel to the 3 connector of
the PXIe-3610 front panel.

4.

Connect the adjoining PXIe-3630 and PXIe-7902 modules using four Mini-SAS HD(m)-
to-Mini-SAS HD(m) (8.25 in.) cables.
a)

Connect the 0 connector of the PXIe-3630 front panel to the PORT 0 connector of
the PXIe-7902 front panel.

b)

Connect the 1 connector of the PXIe-3630 front panel to the PORT 1 connector of
the PXIe-7902 front panel.

c)

Connect the 2 connector of the PXIe-3630 front panel to the PORT 2 connector of
the PXIe-7902 front panel.

d)

Connect the 3 connector of the PXIe-3630 front panel to the PORT 3 connector of
the PXIe-7902 front panel.

30

  | 

ni.com

  | 

mmWave Transceiver System Getting Started Guide

Summary of Contents for PXIe-3610























































































Reviews:

No comments