Programming the mmWave Transceiver System
You can use the NI-mmWave instrument driver to create communications applications for the
mmWave Transceiver System.
The NI-mmWave APIs are used to control the PXIe-3610, PXIe-3620, and PXIe-3630
modules as well as the mmWave radio heads.
Related Information
Installing the Software
on page 7
Refer to the NI-mmWave Manual on ni.com for information about using the instrument driver
in your applications.
NI-mmWave Instrument Driver
NI-mmWave features a set of VIs that exercise the functionality of the mmWave Transceiver
System, including configuration, control, and other device-specific functions.
The NI-mmWave APIs are available in LabVIEW on the LabVIEW Functions palette at
Instrument I/O
»
Instrument Drivers
»
NI mmWave
.
NI-mmWave Examples
The NI-mmWave instrument driver examples are instructional tools that demonstrate some of
the functionality of the mmWave Transceiver System. You can use these examples separately
or integrate them into your systems. NI-mmWave includes examples for getting started and
other software-defined radio (SDR) functionality.
You can access the NI-mmWave examples at
<NIDIR>\LabVIEW <year>\examples
\instr\niMmWave
.
NI-mmWave Reference Project
NI-mmWave includes a reference project that you can use as a starting point for application
development.
You can find this reference project at
<NIDIR>\LabVIEW <year>\examples\instr
\niMmWave\niMmWave Reference Project\niMmWave Reference
Project.lvproj
.
Related Information
Refer to the NI-mmWave Manual on ni.com for information about using the reference project.
Trigger Configuration
Notice
Modifying or reserving system-required PXI triggers will cause runtime
synchronization errors and prohibit system function.
mmWave Transceiver System Getting Started Guide
|
© National Instruments
|
57