![background image](http://html.mh-extra.com/html/national-instruments/pxie-3610/pxie-3610_getting-started-manual_3481823010.webp)
Figure 3. Completed Tripod and mmWave Radio Head Assembly
Related Information
Connecting mmRH-3647/3657 Radio Heads to a Bidirectional System
on page 49
Connecting mmRH-3647/3657 Radio Heads to a Unidirectional System
on page 42
System Setup
This section describes how to connect the modules of your mmWave Transceiver System.
The mmWave Transceiver System modules arrive pre-installed in the chassis.
Notice
Modifying or reserving system-required PXI triggers will cause runtime
synchronization errors and prohibit system function.
Related Information
Trigger Configuration
on page 57
Refer to the NI-mmWave Manual on ni.com for more information about trigger routing.
Unidirectional System Setup
This section describes how to connect the modules of a unidirectional mmWave Transceiver
System.
Unidirectional mmWave Transceiver System configurations are as follows:
•
Unidirectional SISO (baseband)
•
Unidirectional SISO (baseband and IF)
•
Unidirectional MIMO (baseband)
•
Unidirectional MIMO (baseband and IF)
10
|
ni.com
|
mmWave Transceiver System Getting Started Guide