Each configuration consists of two chassis, identical except for the unique components listed
in the following table.
Table 5. Unique Components of Unidirectional System Chassis
Chassis
Unique Component
RX
PXIe-3630 Digitizer
TX
PXIe-3610 Waveform Generator
Interconnecting the Unidirectional SISO (Baseband) Modules
Complete the following steps to connect the modules of the unidirectional SISO (baseband)
mmWave Transceiver System configuration.
1.
Connect the adjoining PXIe-3630 and PXIe-7902 High-Speed Serial Instrument modules
in the RX chassis using four Mini-SAS HD(m)-to-Mini-SAS HD(m) (8.25 in.) cables.
a)
Connect the 0 connector of the PXIe-3630 front panel to the PORT 0 connector of
the PXIe-7902 front panel.
b)
Connect the 1 connector of the PXIe-3630 front panel to the PORT 1 connector of
the PXIe-7902 front panel.
c)
Connect the 2 connector of the PXIe-3630 front panel to the PORT 2 connector of
the PXIe-7902 front panel.
d)
Connect the 3 connector of the PXIe-3630 front panel to the PORT 3 connector of
the PXIe-7902 front panel.
mmWave Transceiver System Getting Started Guide
|
© National Instruments
|
11