National Instruments PXI 8351, User Manual

Page: 116 / 117

Index
NI 8351 User Manual I-8 ni.com
safety specifications, A-4
SATA AHCI enable, 2-8
SATA connector locations (figure), B-18
SATA connectors, SATA to SATA4, B-19
SATA controller mode option, 2-7
SATA port 1/2/3/4, 2-5
SATA RAID enable, 2-8
SATA RAID utility, C-1
SATA1 and SATA2 connector (figure), B-19
save changes, 2-15
Security menu, 2-4, 2-12
serial ATA, 2-7
serial connector, 3-5
connector locations and pinout
(figure), 3-5
connector signals (table), 3-6
serial port A/B, 2-11
serial port header (COM2), B-11
pinout (figure), B-11
signals (table), B-11
serial ports, 3-1
See also COM1 and COM2 connectors
set max ext CPUID = 3, 2-8
set supervisor password, 2-12
set user password, 2-13
single logical proc. mode, 2-8
software
See also drivers
installed on your hard drive, 2-15
LabVIEW, 1-7
LabWindows/CVI, 1-7
Measurement Studio, 1-7
National Instruments software, 1-7
NI resources, D-1
NI-DAQmx, 1-7
NI-VISA, 1-8
specifications
CE compliance, A-4
CPU, A-2
electrical, A-1
electromagnetic compatibility, A-4
environmental, A-3
hard disk drive, A-2
mainboard, A-1
mechanical, A-3
memory, A-3
safety, A-4
summary screen, 2-6
supervisor password is, 2-12
support
technical, D-1
SYS Fan1/SYS Fan2 Speed, 2-9
system backup reminder, 2-13
System Conf Control Panel menu structure
(figure), 2-17
System Conf functions (table), 2-20
system date, 2-5
system time, 2-5
T
technical support, D-1
testing power up, 2-3
training and certification (NI resources), D-1
troubleshooting
controller does not boot, 5-1
damaged module, 5-2
NI resources, D-1
video display, 5-1
two different pairs of identical DIMMs
(figure), B-15
two identical DIMMs in DIMM 1 and
DIMM 3 (figure), B-14
U
Universal Serial Bus (USB), 3-1
connector location and pinout
(figure), 3-3
connector signals (table), 3-3
connectors and signals, 3-3
overview (table), 3-1