Chapter 2
Installation and BIOS Setup
©
National Instruments Corporation
2-5
Power
Use this menu to specify power management settings.
Boot
Use this menu to specify the boot device priority.
Exit
Use this menu to load the BIOS default values or factory default settings
into the BIOS and exit the BIOS setup utility with or without changes.
Main
The items in the
Main
menu are for basic system information and
configuration.
Use the arrow keys (
↑↓)
or <Tab> to highlight the desired item or field.
Use <+> or <–> to switch to the preferred value.
System Time
The time format is <HH> <MM> <SS>.
System Date
The date format is <YYYY> <MM> <DD>.
IDE Primary Master/Slave, SATA Port 1/2/3/4
Press <Page Up>/<+> or <Page Down>/<–> to select
[Manual]
,
[None]
,
or
[Auto]
type. Your drive specifications must match the drive table. The
hard disk will not work properly if you enter improper information for this
category. If your hard disk drive type is not matched or listed, use
[Manual]
to define your own drive type manually.
If you select
[Manual]
, you must enter information in the following items.
Enter the information directly from the keyboard. This information should
be in the hard disk or system documentation.
[Type]
Select how to define the HDD
parameters.
