Chapter 2
Installation and BIOS Setup
©
National Instruments Corporation
2-9
Hardware Monitor
Press <Enter> to enter this submenu.
Auto Fan Speed Control
Use this setting to enable/disable the Smart Fan feature. Smart Fan adjusts
the CPU fan speed automatically depending on the CPU current
temperature, avoiding system damage caused by overheating.
V(VCC5), V(Vcore), V(VCC3), V(V_1P5), V(12V), V(3Vsb),
CPU/SYS Temperature, SYS Fan1/SYS Fan2 Speed
These items display the current status of all of monitored hardware
devices/components, such as CPU voltage, temperature, and fan speed.
ASF Configuration
Use this submenu to specify the ASF configuration.
Minimum WatchDog Timeout
Use this setting to specify the minimum time period for the BIOS to stop
the Watchdog Timer after a reset has occurred.
BIOS Boot Timeout
Use this setting to specify the time period for the BIOS to boot before the
system is reset.
OS Boot Timeout
Use this setting to specify the time period for the OS to boot before the
system is reset.
Power-On Wait Time
Use this setting to specify the maximum amount of time for the Alert
Sending Device (ASD) to establish connection with its transport media.
Console Redirection
Press <Page Up>/<+> or <Page Down>/<–> to configure Console
Redirection. The following submenus appear.
