Chapter 2
Installation and BIOS Setup
©
National Instruments Corporation
2-13
Set User Password
Use this setting to control access to the system at boot.
Virus Check Reminder/System Backup Reminder
Use this setting to display a reminder message at boot (daily, every
Monday, or first of every month).
Password on Boot
Selecting
[Enabled]
requires a password on boot and prior setting of the
supervisor password. If the supervisor password is set and this option is
disabled, the BIOS assumes the user is booting. Options:
[Enabled]
,
[Disabled]
.
Power
Use this menu to specify your power management settings. The options
available depend on the hardware installed in your system.
Resume on Modem Ring
Select
[On]
to wake up the system when an incoming call on the modem is
detected. Options:
[On]
,
[Off]
.
Resume on Time
Select
[On]
to wake up the system at a predetermined time. Options:
[On]
,
[Off]
.
Resume Time
The time format is <HH> <MM> <SS>.
Resume Date
The date format is <MM> <DD> <YYYY>.
Resume on LAN
Select
[Enabled]
to wake up the system when incoming signals are
detected on the specified LAN devices. Options:
[Enabled]
,
[Disabled]
.
